Ford Explorer: Fuel Charging and Controls - 2.3L EcoBoost (201kW/273PS) / Description and Operation - Fuel Charging and Controls - Component Location
2.3L EcoBoost
Item |
Description |
1 |
High-pressure fuel pump |
2 |
High-pressure fuel pump drive unit |
3 |
Fuel injectors (removed with the fuel rail) |
4 |
Fuel rail |
5 |
Throttle body |
Fuel Pump Driver Module
Item |
Description |
1 |
Fuel pump driver module |
System Operation
For System Operation, Refer to Powertrain Control/Emissions Diagnosis (PC/ED) manual. See Section 1 Description and Operation.
Component Description
For
Component Desc..
Other information:
Initialization
Disconnect the battery or remove the RGTM fuse(s).
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
NOTE:
Remove the battery power from the RGTM for 20 seconds before entering initialization mode...
Removal
NOTE:
This procedure provides information about routing, retaining
points and connectors of the cable. It does not include the steps for
removing components to gain access to the cable.
Disconnect the batteries.
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures)...
Categories
When these locks are set, you cannot open the rear doors from the inside.
A child safety lock is on the rear edge of each rear door. You must set the child
safety lock separately on each door.
Left-Hand Side
read more