Ford Explorer: Body and Paint / Front End Sheet Metal Repairs

General Procedures - Body Panel Sectioning

Special Tool(s) / General Equipment Resistance Spotwelding Equipment Spherical Cutter Air Body Saw MIG/MAG Welding Equipment Spot Weld Drill Bit Locking Pliers Materia..

Removal and Installation - Fender Apron Panel

Special Tool(s) / General Equipment 6.5 mm Drill Bit Resistance Spotwelding Equipment Rivet Gun Belt Sander Torx Bit Socket Hot Air Gun 8 mm Drill Bit MIG/MAG W..

Other information:

Ford Explorer 2020-2025 Service Manual: Removal and Installation - Rear Door Upper Moulding

Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: LH side shown, RH side similar. Remove the upper belt moulding screw at front of the door. Torque: 12 lb.in (1.3 Nm) Lift the moulding at the front edge using a non-marring trim tool and slide forward to disengage from the tab at the rear and remove th..

Ford Explorer 2020-2025 Service Manual: General Procedures - Elevation System Check

Check Turn the ignition ON, engine OFF. Set the parking brake. Place the gearshift in REVERSE (R) for rear parking aid sensors. Place the gearshift in DRIVE (D) for front parking aid sensors...