Ford Explorer: Windows and Mirrors / Interior Mirror

Ford Explorer 2020-2024 Owners Manual / Windows and Mirrors / Interior Mirror

WARNING: Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.

Note: Do not clean the mirror housing or glass with harsh abrasives, fuel or other petroleum-based cleaning products.

Мелбет онлайн

You can adjust the interior mirror to your preference. Some mirrors also have a second pivot point. This lets you move the mirror head up or down and from side to side.

Manual Dimming Mirror

Pull the tab below the mirror toward you to reduce the effect of bright light from behind.

Automatic Dimming Mirror (If Equipped)

Note: Do not block the sensors on the front and back of the mirror. A rear center passenger or raised rear center head restraint may also block light from reaching the sensor.

The mirror dims to reduce the effect of bright light from behind. It returns to normal when the bright light from behind is no longer present or if you shift into reverse (R).

Exterior Mirrors

Power Exterior Mirrors WARNING: Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death...

Sun Visors

Rotate the sun visor toward the side window and extend it rearward for extra shade. Illuminated Vanity Mirror Lift the cover to switch the lamp on...

Other information:

Ford Explorer 2020-2024 Service Manual: Removal and Installation - Front Strut and Spring Assembly

Removal NOTICE: Suspension fasteners are critical parts that affect performance of vital components and systems. Failure of these fasteners may result in major service expense. Use the same or equivalent parts if replacement is necessary. Do not use a replacement part of lesser quality or substitute design...

Ford Explorer 2020-2024 Service Manual: Removal and Installation - Powertrain Control Module (PCM)

Special Tool(s) / General Equipment Ford Diagnostic Equipment Removal NOTE: Removal steps in this procedure may contain installation details. NOTE: This step is only necessary when installing a new component. Download the module information to the diagnostic tool using the Programmable Modules Installation routine...