Ford Explorer: Personal Safety System™
This system provides an improved overall level of frontal crash protection to
front seat occupants and is designed to help further reduce the risk of airbag-related
injuries. The system analyzes different occupant conditions and crash severity before
activating the appropriate safety devices to help better protect occupants in a
variety of frontal crash situations.
IPTV Free Trial Your vehicle's Personal Safety System consists of:
- Driver and passenger dual-stage airbag supplemental restraints.
- Front seat outermost seatbelts with pretensioners, energy management retractors
and seatbelt usage sensors.
- Front passenger sensing system.
- Passenger airbag off and on indicators.
- Front crash severity sensors.
- Restraints control module with impact and safing sensors.
- Restraint system warning light and tone.
- The electrical wiring for the airbags, crash sensors, seatbelt pretensioners,
front seatbelt usage sensors, front passenger sensing system and indicator lights.
How Does the Personal Safety System Work?
The Personal Safety System can adapt the deployment strategy of the safety devices
according to crash severity and occupant conditions. A collection of crash and occupant
sensors provides information to the restraints control module. During a crash, the
restraints control module may deploy the seatbelt pretensioners, one or both stages
of the dual-stage airbags based on crash severity and occupant conditions.
WARNING: Persons who fit into the vehicle's seatbelt should not use an
extension. Unnecessary use could result in serious personal injury in the event
of a crash...
Other information:
Removal
Remove the rear bumper cover.
Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation).
If equipped.
Position aside the connector shields.
Remove the rear parking aid sensor...
Removal
NOTE:
LH (left-hand) side shown, RH (right-hand) side similar.
Remove the front door trim panel.
Refer to: Front Door Trim Panel (501-05 Interior Trim and Ornamentation, Removal and Installation).
Remove the front door lock control switch...
Categories
Use the key blade to start your vehicle and unlock or lock the driver door from
outside your vehicle. The integrated keyhead transmitter functions as a programmed
ignition key that operates all the locks and starts your vehicle, as well as a remote
control.

read more