Ford Explorer: Exterior Trim and Ornamentation / Removal and Installation - Running Board
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH side shown, RH side similar.
-
NOTE:
This step requires the aid of another technician.
Remove the bolts and the running board assembly.
Torque:
177 lb.in (20 Nm)
Installation
-
NOTE:
This step requires the aid of another technician.
Install the bolts as sequences
Torque:
177 lb.in (20 Nm)
Removal
NOTE:
Removal steps in this procedure may contain installation details.
NOTE:
LH side shown, RH side similar.
Lower the headliner...
Other information:
Removal
WARNING:
When releasing the cooling system pressure, cover the coolant expansion tank cap with a thick cloth.
Loosen the pressure relief cap.
Disconnect the coolant control valve electrical connector...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the intake manifold.
Refer to: Intake Manifold (303-01A)
.
Disconnect the quick release coupling and remove the hose.
Refer to: Quick Release Coupling (310-00A Fuel System - General Information - 2...
Categories
4 Inch Display

A - Tachometer.
B - Information display.
C - Speedometer.
D - Fuel gauge.
E - Engine coolant temperature gauge.
read more