Ford Explorer: Electronic Feature Group / Cruise Control
Special Tool(s) /
General Equipment
Pick Hook
Removal
Remove the ignition lock cylinder housing.
Refer to: Ignition Lock Cylinder Housing (211-05 Steering Wheel and Column Electr..
Overview
The cruise control system is controlled by the PCM.
The
cruise control mode is selected from the steering wheel mounted
switches (ON/OFF, SET+, SET- and CAN/RES), which are integrated int..
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Disconnect the batteries.
Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
Disconnect the vent hose from the auxiliary battery...
Special Tool(s) /
General Equipment
Boot Clamp Pliers
Materials
Name
Specification
Motorcraft® Premium Long-Life GreaseXG-1-E1
ESA-M1C75-B
Removal
NOTICE:
When servicing inner tie rods, install a new bellows boot
and clamps...
топ
казино на деньги
Categories
WARNING: Do not place your arms on the airbag cover or through the steering
wheel. Failure to follow this instruction could result in personal injury.
WARNING: Keep the areas in front of the airbags free from obstruction.
Do not affix anything to or over the airbag covers. Objects could become projectiles
during airbag deployment or in a sudden stop. Failure to follow this instruction
could result in personal injury or death.
WARNING: Airbags can kill or injure a child in a child restraint. Never
place a rear-facing child restraint in front of an active airbag. If you must use
a forward-facing child restraint in the front seat, move the seat upon which the
child restraint is installed all the way back.
read more