Ford Explorer: Battery, Mounting and Cables / Description and Operation - Battery and Cables - Overview
Overview
The battery and cable system consists of the following:
-
Auxiliary battery (hybrid vehicles)
-
Auxiliary battery cable (hybrid vehicles)
-
Auxiliary battery isolator (hybrid vehicles)
-
Battery
-
Battery cable
-
Battery current sensor (hybrid vehicles)
-
Battery monitoring sensor
-
BJB
-
Battery tray
-
Generator current sensor (if equipped)
Battery Specifications
2.3L EcoBoost Vehicles
Item
Specification
Voltage
12 Volts
Battery amps rating
70 Ah
..
System Operation
Gasoline Vehicles
The
main battery, which is located in the engine compartment, is a 12 volt
DC source connected in a negative ground system and is a voltage
stabilizer for the..
Other information:
Removal
NOTE:
Typical LH (left-hand) seat shown, RH (right-hand) seat similar.
NOTE:
Removal steps in this procedure may contain installation details.
Raise the seat to the full up position.
Disconnect the electrical connector...
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the wiper linkage assembly.
Refer to: Wiper Linkage Assembly (501-16 Wipers and Washers, Removal and Installation).
NOTICE:
Be careful not to damage the link seals during
removal...
https://magicaliptv.com/iptv-free-trials/
Categories
The front outboard and rear safety restraints in the vehicle are combination
lap and shoulder belts.

read more