Ford Explorer: Collision Warning and Collision Avoidance System / Description and Operation - Collision Warning and Collision Avoidance System - Overview
Overview
The
forward collision warning system alerts the driver of a collision risk
by illuminating the red warning indicator located in the IPC information center. The IPC sends a request to the ACM to sound an audible warning chime.
Forward Collision Warning System
https://magicaliptv.com/iptv-free-trials/ The forward collision warning system works in conjunction with the ACC system. During a possible collision event, the CCM commands:
-
the IPC to activate the red warning indicator in the information center.
-
the IPC to activate the chime message.
-
the ACM to mute audio volume and signal the chime.
System Operation
ACC With Pre-Collision Assist
Item
Description
1
ACM
2
RCM
3
CCM
4
IPC
5
BCM
6
GWM
7
ABS mod..
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the rear bumper cover.
Refer to: Rear Bumper Cover (501-19 Bumpers, Removal and Installation).
Disconnect the hands-free liftgate actuation upper sensor electrical connector...
Diagnostic Trouble Code (DTC) Chart
Diagnostics in this manual assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods (100-00 General Information, Description and Operation).
Diagnostic Trouble Code Chart
Module
DTC
Description
Action
BCM
B124A:1..
Categories
You can use the power door lock control or the remote control to lock and unlock
your vehicle.
Power Door Locks
The power door lock control is on the driver and front passenger door panels.

read more