Ford Explorer: Transfer Case / Specifications

Ford Explorer 2020-2024 Service Manual / Powertrain / Automatic Transmission / Transfer Case / Specifications

Lubricants, Fluids, Sealers and Adhesives

Item	Specification
Transfer case fluid	Material: Motorcraft® MERCON® LV Automatic Transmission Fluid / XT-10-QLVC (WSS-M2C938-A) (MERCON® LV, )

лучшее казино онлайн России

Capacities

	Liters
Transfer case - Service fill	1.0

Transfer Case

Description and Operation - Transfer Case - Overview

Transfer case The Transfer Case is a gearbox that attaches to the output shaft of the transmission through a splined input at the transfer case. Torque from the transmission is transferred to the ..

Other information:

Ford Explorer 2020-2024 Service Manual: General Procedures - Piston Selection

Check NOTE: Refer to the appropriate Section 303-01 for the specifications. NOTE: The cylinder bore must be within the specifications for taper and out-of-round before fitting a piston. Measure the cylinder bore in 2 directions...

Ford Explorer 2020-2024 Service Manual: General Procedures - Factory Mode Deactivation

Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center...