Ford Explorer: Adaptive Cruise Control / Overriding the Set Speed
WARNING: If you override the system by pressing the accelerator pedal,
it does not automatically apply the brakes to maintain a gap from any vehicle ahead.
When you press the accelerator pedal, you override the set speed and gap distance.
Use the accelerator pedal normally to intentionally exceed the set speed limit.
When you override the system, the green indicator illuminates and the vehicle
image does not appear in the information display.
The system resumes operation when you release the accelerator pedal. The vehicle
speed decreases to the set speed, or a lower speed if following a slower vehicle.
Canceling the Set Speed
Press the button or tap the brake
pedal.
The set speed does not erase.
Resuming the Set Speed
Press the button.
Your vehicle speed returns to the previously set speed..
Illuminates when you switch lane
centering on. The color of the indicator changes to indicate the system status.
Gray indicates the system is on but inactive...
Other information:
Removal
NOTE:
Removal steps in this procedure may contain installation details.
Remove the wiper pivot arms.
Refer to: Windshield Wiper Pivot Arm (501-16 Wipers and Washers, Removal and Installation).
Remove the retainers...
Removal
WARNING:
The following procedure prescribes critical repair steps
required for correct supplemental restraint system operation during a
crash. Follow all notes and steps carefully. Failure to follow step
instructions may result in incorrect operation of the supplemental
restraint system and increases the risk of serious personal injury or
death in a crash...
Categories
Use the key blade to start your vehicle and unlock or lock the driver door from
outside your vehicle. The integrated keyhead transmitter functions as a programmed
ignition key that operates all the locks and starts your vehicle, as well as a remote
control.

read more