Ford Explorer: Engine / Engine - 2.3L EcoBoost (201kW/273PS)

General Procedures - Valve Stem Diameter

Check NOTE: Refer to the appropriate Section 303-01 for the specification. Measure the diameter of each intake and exhaust valve stem at the points shown...

Specifications

  Engine Item Specification Displacement 140  in³ ( 2.3  L) No. of cylinders 4 Bore 3...

Other information:

Ford Explorer 2020-2026 Service Manual: Removal and Installation - A-Pillar Moulding

Special Tool(s) / General Equipment Interior Trim Remover Removal NOTICE: Only use moderate force. NOTE: Removal steps in this procedure may contain installation details. NOTE: LH side shown, RH similar. Using a non-marring trim removal tool disengage the retainer clips starting approximately 9 inches from the top...

Ford Explorer 2020-2026 Service Manual: General Procedures - Factory Mode Deactivation

Deactivation NOTE: During vehicle build, some modules, such as the IPC and BCM module are set in factory mode. Factory mode reduces the drain on the battery during longer periods where the vehicle is not used. While in the factory mode, various systems may be altered or disabled and the IPC displays FACTORY MODE CONTACT DEALER in the message center...